Restore smooth fan operation with the KTE 3089R 2035080 3-speed pull chain switch. This replacement switch is designed to bring back proper low, medium, and high speed control when your original switch becomes worn out, stops changing speeds, or no longer works properly. It’s a simple and affordable way to repair your ceiling fan without replacing the entire unit.
- 3-Speed Operation: Cycles through Off, High, Medium, and Low speed settings
- Compatible with Many Fans: Commonly used in ceiling fans from brands such as Hunter, Harbor Breeze, Hampton Bay, Casablanca, Emerson, Minka Aire, Monte Carlo, Craftmade, and more
- Solves Common Problems: Helps restore speed control when a fan is stuck on one speed, won’t change speeds, or has a damaged pull chain
- DIY Friendly: Easy replacement for many ceiling fan applications
KTE 3089R Specifications
- Condition: Brand new
- Model: 3089R
- Alternate part number: 3089 circuit R
- Electrical rating: 6A 125VAC / 3A 250VAC
- Switch type: Pull chain, 4-position
- Wiring: Push-in terminals (available with 4 wires or terminal-only)
- Function sequence: Off → High → Medium → Low
- Internal positions:
- 1: Off
- 2: L-1
- 3: L-2
- 4: L-3
- Certifications: UL (UR) approved
- Material: Durable plastic housing
Compatible Replacements
This 3 way 4 wire fan switch is commonly used as a replacement for the following models:
- Zing Ear ZE-208S with 4 pre-attached wires
- Zing Ear ZE-208S
- Zing Ear ZE-268S1
- Shine Top LS-102-01
- GC35-0867
- Sun-Lite SL-A-200A
- Wu Pin LJY-209A
- LJY-280A 4-hole 3-speed switch
- Well Tec 101 E117997
- Fransco S01 4-hole
- Jin You 4-hole 3-speed switch
- Santa 4-hole 3-speed switch
- YouYan E98999
Wiring Instructions
Need help installing? View our step-by-step guide:
- 3089R 3 way switch wiring diagram & instructions
KTE 3089R FAQs
-
How do I know if the KTE 3089R switch will fit my fan?
The 3089R circuit R is a universal 4-wire switch. Check your existing switch for a matching layout: the terminal sequence should be 1-2-3-L (counterclockwise) with the black (AC line) wire connected to terminal “L” and it should match the electrical rating of 6A 125VAC / 3A 250VAC.
-
Can I use this for my ceiling fan light?
No. This is a 3-speed fan motor switch. If you need a switch for a light kit, you typically need a 2-wire (on/off) switch like the KTE 303.
-
My fan is stuck on one speed—will this fix it?
Yes. A faulty internal contact in the pull chain switch is the most common reason a fan gets “stuck” on one speed or refuses to change speeds when pulled.
-
What problems does this switch solve?
Replacing a faulty switch can fix a variety of issues including a fan stuck on a single speed, a pull chain that is snapped or jammed, a fan that will not turn on or off, and incorrect speed cycling where settings like Medium and Low feel the same.
-
How do I wire the 3089R switch?
Before starting, always turn off the power at the circuit breaker and take a photo of your original wiring for reference. Note the color of the wire attached to each terminal label (L, 1, 2, and 3). Insert each wire into the corresponding terminal on the new switch so that the wire from “3” on the old switch goes into “3” on the new switch, and so on.
-
The fan hums but doesn’t move. What’s wrong?
A humming sound typically indicates power is reaching the motor, but the circuit is incomplete or incorrect. First, verify that all four wires are pushed fully into the terminals and are in the correct numerical order. If the wiring is definitely correct, your fan capacitor may have failed and might also need to be replaced.
Good
Switch arrived and function as described.
Same switch that was in this 20 year old fan, Worked as it should.
There good switchs. But need wiring connections to match Hunters wiring. You don’t have that.
My husband did not have any problem installing the switch. Also very satisfied with the quick respond to our order.