The Zing Ear WLD-07 Type R3L wattage limiter is designed to help protect ceiling fan light kits by limiting the maximum lighting load to 180 watts. Under normal operation, when the total wattage of the installed bulbs is 180 watts or less, the limiter remains inactive and allows the light kit to operate normally.
If the total bulb wattage exceeds 180 watts, the limiter will temporarily interrupt power to the light kit to help prevent overheating and protect the fan’s wiring and components. This safety device is commonly found in ceiling fans with integrated light kits and can be replaced if it becomes faulty or stops allowing the lights to operate correctly.
- Automatic Overload Protection: Helps protect ceiling fan light kits by automatically interrupting power when the lighting load exceeds the rated wattage limit.
- Wide Compatibility: Commonly used in ceiling fan light kits that require a wattage limiter to help protect against excessive lighting loads.
- Fits Popular Fan Brands: Compatible with many popular ceiling fan brands, including Hunter, Hampton Bay, Westinghouse, Litex, Minka Aire, Casablanca, Harbor Breeze, and others.
- Cost-Effective Repair: Save money by replacing the limiter instead of the entire fan or light fixture
Zing Ear WLD-07 Specifications
- Condition: Brand new
- Model: WLD-07 R3L
- Alternate part numbers: WLD 07, WLD07, WLD-07-R3L
- Electrical rating: 180 Watt – Acts when wattage limit exceeds 180 Watt
- Frequency: 60Hz
- Wiring: Wire leads
- Wires length: 6in
- Compatible with LED, Incandescent, and Halogen light bulbs
- Certifications: UR (UL) approved E136609
- Material: Plastic housing with phenolic base
Compatible Replacements
Zing Ear WLD-07 fan power regulator can be used a replacement for the following models:
- Hunter G1932 EFU190SD
- KTE L-101
- PL-190B E216171 and PL-190C E216171 by Rhine Electronic Co., Ltd.
- XL 190 E313648
Wiring Instructions
Need help installing? View our step-by-step guide:
- WLD-07 ceiling fan wattage limiter Replacement wiring diagram & instructions
Zing Ear WLD-07 FAQs
-
What does the WLD-07 wattage limiter do?
The WLD-07 helps protect your ceiling fan light kit by limiting the maximum lighting load to 180 watts. If the total bulb wattage exceeds 180 watts, the limiter temporarily interrupts power to help prevent overheating and protect the fan’s electrical components.
-
How do I know if the WLD-07 is causing my fan lights to stop working?
A faulty wattage limiter can cause fan lights to stop working, turn off unexpectedly, flicker, or fail to turn on even when the bulbs and pull chain switch are working properly. Replacing the limiter may restore normal operation.
-
Will this wattage limiter fit my ceiling fan?
The WLD-07 is commonly used in ceiling fan light kits from brands such as Hunter, Hampton Bay, Westinghouse, Litex, Minka Aire, Casablanca, and Harbor Breeze. Compare the part number, wiring style, and electrical rating of your existing limiter before purchasing.
-
Can I use LED bulbs with the WLD-07?
Yes. The WLD-07 is compatible with LED, incandescent, and halogen light bulbs. Just make sure the combined wattage of all installed bulbs does not exceed the fan manufacturer’s recommended limit.
-
What happens if the light kit exceeds 180 watts?
If the total bulb wattage exceeds 180 watts, the WLD-07 will temporarily interrupt power to the light kit. This safety feature helps prevent overheating and protects the fan’s wiring and components.
-
What models can the WLD-07 replace?
The WLD-07 can be used as a replacement for compatible wattage limiters including the Hunter G1932 EFU190SD, KTE L-101, PL-190B E216171, and XL 190 E313648. Always compare the wiring and specifications of your existing limiter before ordering.
-
Can a faulty wattage limiter cause buzzing or humming?
In some cases, yes. A failing wattage limiter can contribute to buzzing, humming, flickering lights, or intermittent light operation. However, similar symptoms can also be caused by bulbs, wiring, or other fan components.
-
Can I install the WLD-07 myself?
Yes. Replacing a wattage limiter is typically a straightforward DIY repair. Before starting, turn off power at the circuit breaker and take a photo of the existing wiring so the new limiter can be connected the same way.
-
Can I bypass or remove a wattage limiter?
The wattage limiter is a safety device designed to help protect the fan’s light kit from excessive electrical load. If your existing limiter has failed, replacing it with a compatible limiter is generally the recommended solution.
Reviews
There are no reviews yet