The Zing Ear ZE-106C is a rotary on/off switch for replacing a worn or broken turn-knob switch on a lamp. It has two pre-attached wire leads and a 3/8 inch threaded neck, so it drops into the same size hole many lamp sockets and housings already use.
It works with incandescent, halogen, LED and CFL bulbs within its electrical rating. Four knobs come in the box (gold/brass, silver/nickel, bronze/antique brass and black), so you can pick the finish that suits the lamp.
- Simple on/off control: One twist of the knob turns the light on or off
- Pre-attached leads: Two 18 AWG wire leads, about 5-3/8 in. long, come already fitted
- Fits a 3/8 inch hole: Plastic 3/8 inch thread for standard lamp mounting holes
- Four knob finishes included: Gold (brass), silver (nickel), bronze (antique brass) and black
- Works with common bulbs: Incandescent, halogen, LED and CFL
Zing Ear ZE-106C Specifications
- Model: ZE-106C
- Function: On/Off (two-wire, single circuit)
- Electrical rating: 6A 125VAC, 3A 250VAC
- Thread: 3/8 inch, plastic
- Mounting: Fits a 3/8 inch hole
- Wire leads: 5-3/8 in. long, 18 AWG
- Base material: Phenolic
- Knob material: Plastic
- Knob colors included: Gold (brass), silver (nickel), bronze (antique brass), black
- Certifications: UL and CSA approved (per manufacturer listing)
- Package contents: ZE-106C switch, four knobs, two wire connectors, wiring diagram manual, warranty card
Compatible Replacements
The manufacturer lists the ZE-106C as compatible with these part numbers: Sun-Lite J-106A, Zing Ear ZE-106M and NTE 54-542. Always compare the mounting hole size, function and electrical rating with your original switch before ordering.
Zing Ear ZE-106C FAQs
-
What does the ZE-106C do?
The ZE-106C is a two-wire rotary switch that turns a lamp on and off with a twist of the knob. It replaces a worn out or broken turn-knob switch.
-
What size hole does the ZE-106C fit?
It has a 3/8 inch plastic thread and fits a 3/8 inch mounting hole. Measure the hole on your lamp before ordering.
-
Can I use the ZE-106C with LED bulbs?
Yes. The manufacturer lists it for incandescent, halogen, LED and CFL bulbs, as long as the total load stays within the 6A 125VAC rating.
-
What is in the package?
You get the ZE-106C switch, four knobs in different colors, two wire connectors, a wiring diagram manual and a warranty card.
-
Is this a 3-way switch?
No. The ZE-106C is a simple on/off switch with two wires. If your lamp has a three-wire switch with multiple positions, look at the ZE-116 series instead.
-
Should I turn off the power before replacing it?
Yes. Unplug the lamp before you touch any wiring, and use a qualified electrician if you are not comfortable making the repair.


Reviews
There are no reviews yet