The Zing Ear ZE-106M is a single pole, single throw (SPST) rotary switch for turning a lamp or light fixture on and off with a twist of the knob. It has a metal shell and two 6 inch, 18 gauge wire leads, and it mounts in a 3/8 inch hole.
It is a common replacement for worn lamp switches and can also be used in canopy lights and other small fixtures that need a simple on/off control within its rating.
- On/off control: Two-wire, single-circuit rotary switch
- Metal shell: Metal up shell construction
- Pre-attached leads: Two 6 in. wires, 18 AWG
- Common bulb types: Incandescent, halogen, LED and CFL
Zing Ear ZE-106M Specifications
- Model: ZE-106M (also listed as ZE-106 E89885)
- Finish options: Brass, Nickel
- Function: On-Off
- Control method: Turn knob
- Switch construction: 2-wire, single circuit (SPST)
- Electrical rating: 6A 125VAC, 3A 250VAC, 3A 125VL
- Mounting hole required: 3/8 in. wide, 3/8 in. deep or less
- Wire leads: 6 in. each, 18 AWG
- Shell material: Metal
- Bulb compatibility: Incandescent, halogen, LED and CFL
- Certifications: UR (UL) recognized, CSA approved
Compatible Replacements
The ZE-106M is compatible with these part numbers: Sun-Lite J-106A, NTE 54-542, Satco 90-501 and 80-1132 (3/8 inch thread), Shine Top LS-309M and Canal RS-02. Confirm the hole size, wire count and rating against your original switch before ordering.
Zing Ear ZE-106M FAQs
-
What does the ZE-106M do?
It is a two-wire rotary switch that turns a lamp or small light fixture on and off. It is a single pole, single throw (SPST) switch.
-
What mounting hole does the ZE-106M need?
A 3/8 inch hole.
-
Can the ZE-106M be used with LED bulbs?
Yes. It is listed for incandescent, halogen, LED and CFL bulbs, provided the load stays within the 6A 125VAC rating.
-
Is the ZE-106M a 3-way switch?
No. It has two wires and one circuit. If your original switch has three wires, see the ZE-116 series.
-
How long are the wire leads?
Each lead is 6 inches long and 18 AWG.
-
Can I install it myself?
Many people replace lamp switches themselves. Unplug the lamp first, and have a qualified electrician do the work if you are unsure.

Reviews
There are no reviews yet