The Zing Ear ZE-116M is a 3-way rotary light switch with three wire leads. It uses single pole triple throw (SP3T) circuitry to control two light circuits from one knob, so you can switch between off, light 1, light 2, and both lights on.
It mounts in a 3/8 inch hole and is used in table lamps, floor and torchiere lamps, ceiling canopy lights, and bedside lighting such as in motels and hotels.
- Two circuits, one knob: Off, L-1, L-2 and L-1-2 positions
- Three wire leads: 5 in. each, 18 AWG
- 3/8 inch mounting hole: Depth of 3/8 in. or less
- Metal shell: Metal up shell construction
- Common bulb types: Incandescent, halogen, LED and CFL
Zing Ear ZE-116M Specifications
- Model: ZE-116M (also listed as ZE-116)
- Finish options: Brass, Nickel
- Function: OFF, L-1, L-2, L-1-2 (off, light 1, light 2, both lights)
- Control method: Turn knob
- Switch construction: 3-wire, 3-way, SP3T
- Electrical rating: 6A 125VAC, 3A 250VAC, 3A 125VL
- Mounting hole required: 3/8 in. wide, 3/8 in. deep or less
- Wire leads: 5 in. each, 18 AWG
- Shell material: Metal
- Bulb compatibility: Incandescent, halogen, LED and CFL
- Certifications: UR (UL) recognized, CSA approved
Compatible Replacements
The ZE-116M is compatible with Canal CS50-R Series, Shine Top E218558 and GC Electronics 35-1857. Match the switching positions and wire count to your original switch, not just its appearance.
Zing Ear ZE-116M FAQs
-
What does the ZE-116M do?
It controls two light circuits with one knob. The positions are off, light 1, light 2, and both lights on.
-
Is the ZE-116M the same as a 2-wire on/off switch?
No. It has three wires and three operating positions. A two-wire on/off switch such as the ZE-106M will not give you the same function.
-
What mounting hole does it need?
A 3/8 inch hole, with a depth of 3/8 inch or less.
-
Where is a 3-way rotary switch like this used?
Table lamps, floor and torchiere lamps, ceiling canopy lights, and bedside lights in motels and hotels.
-
Should I hire an electrician?
If you are unsure how your fixture is wired, yes. Always disconnect power before replacing any switch.

Reviews
There are no reviews yet