The Zing Ear ZE-310D 2-light cluster socket is a replacement lamp holder for ceiling fans controlled by a remote. It provides two medium base (E26) sockets and uses a 2-wire connection. This version does not include a pull chain switch, making it the appropriate choice for light assemblies controlled by a remote.
- Two-Light Cluster Socket: Holds up to two standard medium base (E26) light bulbs
- For Remote-Controlled Ceiling Fans: Used in ceiling fans controlled by a remote control
- Many Uses: Also used in ceiling fan bowls, lamp fitters, table lamps, floor lamps and light fixtures
- No Pull Chain Switch: This lamp holder does not include a pull chain switch
- 2-Wire Design: Replacement lamp holder with a 2-wire connection
- UL Listed and CSA Approved: UL listed 73K0 E95014
Zing Ear ZE-310D Specifications
- Condition: Brand new
- Type: 2-light socket cluster assembly
- Model: ZE-310D
- Alternate part number: ZE 310D, ZE310D
- Socket size: Holds 2 standard medium base bulbs (E27 / E26 socket)
- Electrical rating: 660W 250V
- Mount: 1/8 inch pipe thread (IP) mounting bracket
- 3/8 inch pipe
- Wire length: 6 inches
- Wiring: 2-wire, wire leads
- Certifications: UL listed 73K0 E95014, CSA approved
Compatible With Many Ceiling Fans
The Zing Ear ZE-310D lampholder is commonly used in ceiling fans from Hunter, Harbor Breeze, Hampton Bay and Casablanca. Compare your existing lamp holder to the ZE-310D before ordering.
Check Your Existing Light Assembly
Before ordering, compare your existing lamp holder to the ZE-310D. Confirm that your light assembly uses two medium base (E26) sockets with a 2-wire connection, and that it is controlled by a remote rather than a pull chain.
Need a Different Version?
If your light assembly needs a pull chain switch, please check the Zing Ear ZE-310D with ZE-109M instead. If you need smaller E12 candelabra bulbs, see the Zing Ear ZE-301D.
Wiring Instructions
Need help installing? View our step-by-step guide:
Zing Ear ZE-310D FAQs
-
What is the Zing Ear ZE-310D?
The ZE-310D is a 2-light cluster socket lamp holder with two medium base (E26) sockets and a 2-wire connection. It does not include a pull chain switch.
-
Where can I use the ZE-310D?
It is used in ceiling fans controlled by a remote, in ceiling fan bowls and lamp fitters, and in table lamps, floor lamps and light fixtures.
-
What type of light bulbs does the ZE-310D use?
The ZE-310D holds up to two standard medium base (E26 / E27) light bulbs. Always use bulbs that meet the wattage limits recommended by your ceiling fan or light fixture manufacturer.
-
What is the difference between the ZE-310D and the ZE-301D?
The ZE-310D uses two medium base (E26) sockets and is rated 660W 250V. The ZE-301D uses two smaller E12 candelabra sockets and is rated 75W 125V. Check the size of the bulbs in your fan before you choose.
-
How can I confirm this is the right replacement lamp holder?
Compare your existing assembly to confirm it has two medium base bulb sockets, a 2-wire connection, and no pull chain switch. If your light is controlled by a pull chain, you need the ZE-310D with the ZE-109M pull chain switch.
-
Can I install the ZE-310D myself?
Yes. Replacing a lamp holder is typically a straightforward DIY repair. Before starting, turn off power at the circuit breaker and take a photo of the existing wiring so the new lamp holder can be connected the same way.


Reviews
There are no reviews yet