A 2 speed, 3-wire pull chain switch has three terminals: 1, 2 and L. The terminal number order and the terminal the black wire attaches to can differ between models, so match your old switch before you wire.
Safety: turn off the breaker and test that the fan is dead before touching wires.
Match your exact model. These three things can differ between switches:
- The order the terminal numbers run: clockwise or counterclockwise.
- The terminal the black (hot) wire attaches to.
- Which terminals each pull position connects.
A diagram for one model can wire another one wrong, so find your number below.
Pick your model
Questions about 2 speed, 3-wire switches
What is a 2 speed, 3-wire fan switch?
It is a pull chain switch with three terminals (1, 2 and L) that gives a fan two speeds, High and Low, plus Off.
Where does the black wire go on a 2 speed, 3-wire switch?
It depends on the model, so use the terminal your old switch used. On the Zing Ear ZE-228S the black wire (AC line/power) goes on L and the terminals run 1-2-L counterclockwise.
Can I use a 3 speed, 4-wire switch on a 2 speed fan?
No. A 3 speed switch has four terminals and a different internal design. Replace a 2 speed switch with another 2 speed, 3-wire switch that matches the terminal order and black wire terminal of your old one.
What matters most when matching a replacement switch?
The terminal number sequence (clockwise or counterclockwise) and the terminal the black (hot) wire attaches to. Check both on your old switch before you buy. The Ceiling Fan Switch Guide can help you identify it.
Need a different switch? See all wiring diagrams or the 3 speed, 4-wire switches. Ready to buy? Browse 2 speed switches. Not sure which number you have? Use the Ceiling Fan Switch Guide.
