Wiring diagram and instructions for the Zing Ear ZE-228S, a 2 speed, 3-wire pull chain fan switch. The black wire goes on terminal L, and the terminals run 1-2-L counterclockwise.
Safety: turn off the electrical current at the source. Skipping this step can cause electric shock, fire, serious injury or death.
Check your old switch first. This wiring diagram is for switches with three terminals where:
- The terminal number sequence is 1-2-L in a counterclockwise direction.
- The black wire (AC line/power) is attached to terminal L.
- The internal positions are Off, L-1 and L-2.
If your old switch does not match all three, these wiring instructions will not work. See all 2 speed, 3-wire switches.
Switches this wiring diagram covers
| Switch | Details |
|---|---|
| Zing Ear ZE-228S | View the ZE-228S |
| Leviton 1690 | Replaced by the ZE-228S |
| Gardner Bender GSW-33 (GSW33) | Replaced by the ZE-228S |
| Jin You and Santa 2-speed switches | Replaced by the ZE-228S |
ZE-228S terminals

Pull positions
| Pull position | Speed | Connected terminals |
|---|---|---|
| 1 | Off | None |
| 2 | High | L-1 |
| 3 | Low | L-2 |
How to wire the ZE-228S
- Turn off the electrical current at the source.
- Do not cut the wires off the old switch. Multi-strand wires are soldered together, so they can be re-attached to the new switch.
- Note the color of each wire and the terminal number it is attached to (L, 1 or 2).
- Remove the wires from the old switch.
- Make sure each wire lead is the same length as the line beside the word STRIP. If a lead is shorter, strip the wire to make it the same length.
- Attach the wires to the new switch as noted in step 3, so the wire from terminal 1 on the old switch goes on terminal 1 on the new one, and so on. Insert the wires into the terminals on the side of the switch, not the holes on the surface.
Questions about the ZE-228S
How do I know if the ZE-228S will fit my fan?
Check your old switch: it should be a 2 speed switch with three terminals running 1-2-L counterclockwise, the black wire on L, and a rating of 6A 125VAC / 3A 250VAC.
Where does the black wire go on the ZE-228S?
The black wire (AC line/power) goes on terminal L. Terminal number order and the black wire terminal are the two things to match on your old switch.
Can I use the ZE-228S on a 3 speed fan?
No. The ZE-228S gives two speeds, High and Low, plus Off. A 3 speed fan needs a 3 speed, 4-wire switch, so check your old switch first.
Can the ZE-228S be used as a light switch?
Yes. Paired with a 1N5404 diode it can help adjust the brightness of compatible halogen and incandescent light kits.
What if my wire colors do not match?
Colors vary between fans. Go by the terminal number your old switch used for each wire, not by color, and note them before removing anything.
More wiring help: 2 speed, 3-wire switches ยท all ceiling fan wiring diagrams ยท Ceiling Fan Switch Guide ยท Contact us
