Customer Service

 

 

โฐ Monโ€“Fri
10:00 AM โ€“ 5:00 PM (EST)
โœ‰๏ธ support@switchprince.com
๐Ÿ“ Ships from the United States

Zing Ear ZE-268S5 and ZE-208S5-1T Wiring Diagram

Wiring diagram and instructions for the Zing Ear ZE-268S5 and ZE-208S5-1T 4 speed pull chain fan switches. The terminals run 1-2-3-4-L in a counterclockwise direction.

Safety: turn off the electrical current at the source. Skipping this step can cause electric shock, fire, serious injury or death.

Check your old switch first. This wiring diagram is for switches with four numbered terminals plus L where:

  • The terminal number sequence is 1-2-3-4-L in a counterclockwise direction.
  • The internal positions are Off, L-1, L-2-3-4, L-3-4 and L-4.

If your old switch does not match both, these wiring instructions will not work. See all 4 speed switches.

Switches this wiring diagram covers

SwitchDetails
Zing Ear ZE-268S5View the ZE-268S5
Zing Ear ZE-208S5-1TView the ZE-208S5-1T
Jin You E70469 PB108 (5 terminals model)Replaced by the ZE-208S5-1T

ZE-268S5 and ZE-208S5-1T terminals

Zing Ear ZE-268S5 and ZE-208S5-1T wiring diagram showing terminals 1, 2, 3, 4 and L in counterclockwise order

Pull positions

Pull positionSpeedConnected terminals
1OffNone
2HighL-1
3MediumL-2-3-4
4LowL-3-4
5LowestL-4

How to wire the ZE-268S5 and ZE-208S5-1T

  1. Turn off the electrical current at the source. Failure to disconnect power may cause fire, electric shock, serious injury or death.
  2. Do not cut the wires off the old switch. Multi-strand wires are soldered together, so they can be re-attached to the new switch.
  3. Note the color of each wire and the terminal number it is attached to.
  4. Remove the wires from the old switch.
  5. Make sure each wire lead is the same length as the line beside the word STRIP. If a lead is shorter, strip the wire to make it the same length.
  6. Attach the wires to the new switch as noted in step 3. Insert the wires into the terminals on the side of the switch, not the holes on the surface.

Capacitor information

Common capacitors used with ZE-268S5 and ZE-208S5-1T switches: CBB61.

Questions about the ZE-268S5 and ZE-208S5-1T

How do I know if this wiring diagram matches my switch?

Check your old switch: the terminals should run 1-2-3-4-L in a counterclockwise direction and the internal positions should be Off, L-1, L-2-3-4, L-3-4 and L-4. If they do not match, these instructions will not work.

Are the ZE-268S5 and ZE-208S5-1T wired the same way?

Yes. Both have the same terminal sequence and internal positions, so one wiring diagram covers both.

Which wire goes on which terminal?

Wire each lead to the same terminal number it was on your old switch. Note the color and terminal number of every wire before you remove anything, and use the diagram above to find terminals 1, 2, 3, 4 and L.

Can I use these switches on a 3 speed fan?

No. They give four speeds (High, Medium, Low and Lowest) plus Off, so they need a fan wired for 4 speeds. A 3 speed fan needs a 3 speed switch.

What capacitor is used with these switches?

The common capacitor used with the ZE-268S5 and ZE-208S5-1T is a CBB61.

Leave a Reply

Your email address will not be published. Required fields are marked *

What Our Clients Say
54 reviews