Customer Service

 

 

โฐ Monโ€“Fri
10:00 AM โ€“ 5:00 PM (EST)
โœ‰๏ธ support@switchprince.com
๐Ÿ“ Ships from the United States

Ceiling Fan Capacitor Wiring Diagram & Replacement Guide

How to replace a ceiling fan capacitor: match the uF values, voltage and wire count of your old capacitor, then connect each wire on the new capacitor to the same fan wire.

Safety: turn off the electrical current at the source by turning off the circuit breaker. A capacitor can hold a charge after the power is off, so if you are not sure how to discharge it safely, ask an electrician. Skipping these steps can cause electric shock, fire, serious injury or death.

Check your old capacitor first. The label on the old capacitor tells you what to buy:

  • The uF (MF) values printed on it, for example 4.5uF, 5uF and 6uF.
  • The voltage rating, for example 250VAC.
  • The number of wires: 2, 3, 4 or 5.

See all ceiling fan capacitors.

What to match on your old capacitor

CheckWhat to match
uF (MF) valuesUse the same values printed on the old capacitor. Multi-speed fans often use more than one value, for example 4uF, 5uF and 6uF.
Voltage ratingEqual to or higher than the old capacitor. Our capacitors are rated 250VAC, and one 5-wire model is rated 300V/250V/250V.
Wire countThe same number of wires as the old capacitor: 2, 3, 4 or 5.
Wire colorsColors can differ between manufacturers. Do not match by color alone.
TypeAC motor run capacitor, commonly labeled CBB61 for ceiling fans. For AC fans only, not DC motors.

How to replace a ceiling fan capacitor

  1. Turn off the electrical current at the source by turning off the circuit breaker. Failure to disconnect power may cause fire, electric shock, serious injury or death.
  2. Take a photo of the existing wiring so you can see how the old capacitor is connected.
  3. Read the label on the old capacitor and note the uF values, the voltage rating and the number of wires.
  4. Label each wire with tape before you disconnect anything. Write the wire color, its position and the uF value if it is printed on the label.
  5. Disconnect the wires from the old capacitor and remove it. Replace one capacitor at a time.
  6. Connect each wire on the new capacitor to the same fan wire that the matching wire on the old capacitor was connected to. Match the uF value and position, not the color alone.
  7. Secure each connection with a wire connector by twisting it clockwise. Loose connections can cause fire, electric shock or serious injury.
  8. Put the housing back, restore power and test every fan speed.

How to read a ceiling fan capacitor

Each colored wire on a multi-speed capacitor is tied to one uF value printed on the label. Use these two examples to see how the label and the wires line up.

CBB61 5-wire ceiling fan capacitor label showing red 4.5uF, brown 5uF and purple 5uF with two gray wires
CBB61 5-wire 4.5uF + 5uF + 5uFLabel
Red wire4.5uF / 250V
Brown wire5uF / 250V
Purple wire5uF / 250V
Two gray wires (opposite side)No uF value printed
CBB61 4-wire ceiling fan capacitor label showing red 4.5uF, brown 5uF and purple 6uF with one gray wire
CBB61 4-wire 4.5uF + 5uF + 6uFLabel
Red wire4.5uF / 250V
Brown wire5uF / 250V
Purple wire6uF / 250V
One gray wire (opposite side)No uF value printed

Your old capacitor may use different colors or a different layout. Always follow the label and the photo of your own wiring.

Ceiling fan capacitors by wire count

2-wire capacitors

One uF value, with one wire on each side. Both wires connect the same way the old capacitor was connected.

3-wire capacitors

Two uF values. Our 1.5uF + 2.5uF capacitor is typically labeled 1.5uF, 2.5uF and COM.

4-wire capacitors

Two or three uF values on four wires. The 5uF + 5uF capacitor has two wires on each side. The 4.5uF + 5uF + 6uF capacitor has three wires on one side and one on the other.

5-wire capacitors

Three uF values on five wires, usually used on multi-speed fans. The 4.5uF + 5uF + 5uF and 4uF + 5uF + 6uF capacitors have three wires on one side and two on the other.

Questions about ceiling fan capacitor wiring

How do I wire a ceiling fan capacitor?

Turn off the breaker, take a photo of the existing wiring, then disconnect the old capacitor. Connect each wire on the new capacitor to the same fan wire that the matching wire on the old capacitor was connected to. Secure each connection with a wire connector, then restore power and test every speed.

Do the wire colors have to match my old capacitor?

No. Wire colors can differ between manufacturers. Connect each new wire to the same fan wire as the old one, using your photo and the wire position or label, not the color alone.

What does the uF or MF number on a capacitor mean?

It is the capacitance, measured in microfarads and written uF, ยตF or MF. Your replacement needs the same uF values that are printed on the label of the old capacitor.

Can I use a capacitor with a higher voltage rating?

Yes. A capacitor with the same or a higher voltage rating is fine. Never use one with a lower voltage rating than the original.

Can I use different uF values than my old capacitor?

No. Use the same uF values as the old capacitor. A mismatch can cause poor performance or motor strain.

Why does the light work but the fan will not run?

The light is on a separate circuit from the fan motor. If the motor hums, starts slowly or will not start while the light works, the ceiling fan capacitor is a common cause.

Is it safe to handle the old capacitor?

Turn the power off at the breaker first. A capacitor can hold a charge after the power is off, so if you are not sure how to discharge it safely, ask an electrician.

What Our Clients Say
54 reviews