Customer Service

 

 

โฐ Monโ€“Fri
10:00 AM โ€“ 5:00 PM (EST)
โœ‰๏ธ support@switchprince.com
๐Ÿ“ Ships from the United States

Replacement Switches & Parts for Hunter Ceiling Fans

A Hunter ceiling fan that stops changing speed, loses its light or won’t reverse usually doesn’t need replacing. In most cases one small part has worn out: a pull chain switch, a light socket, a reverse switch, a wattage limiter or a capacitor. SwitchPrince stocks brand new replacement parts that are commonly used in Hunter fans, with the compatible Hunter model numbers listed on each product page.

Use the guide below to find the part that matches what your fan is doing.

Find your Hunter fan part by symptom

What your fan is doingPart you probably needShop
Stuck on one speed, skips a speed, or the pull chain no longer clicksFan speed pull chain switch (2, 3 or 4 speed)2 speed, 3 speed, 4 speed
Light won’t turn on or off, or the light chain brokeLight pull chain switch (2-wire on/off, or 3-way for two lights)2-wire light switches, 3-way light switch
Light kit socket burnt, loose or flickeringLight socket clusterCeiling fan light sockets
Light dim, flickering or dead although the bulbs are goodWattage limiterWattage limiters
Fan won’t change directionReverse (direction) switchReverse switches
Fan hums, starts slowly or won’t start, but the light worksFan capacitorCeiling fan capacitors

Hunter models and part numbers listed on our product pages

These are the Hunter references that appear on the product pages today. Always compare your own fan’s model and your old part before you order.

PartHunter compatibility listed on the product page
Zing Ear ZE-301D light socket clusterHunter models 20720-530, 51014, 51015, 51041, 52034, 52037, 52038, 52081, 52082, 52090, 53047, 53048, 53058, 53090, 53091, 53109, 53111, 53175, 53176 and 54095. Also used with light kit part numbers 53208299, 9694202000, A187-0132184 and K053210214.
Zing Ear WLD-07 R3L wattage limiterReplacement for Hunter G1932 EFU190SD. 180 watt limit, works with LED, incandescent and halogen bulbs.
Zing Ear ZE-228S 2 speed switchUsed with Hunter fans, such as model 22272.
KTE 303 2-wire light switchCompatible with Hunter fans, plus Casablanca and Clarkston (SW18030).
CBB61 ceiling fan capacitorsHunter is listed among the compatible brands on each capacitor product page. Match the wire count (2, 3, 4 or 5), the uF values and the voltage of your old capacitor.
3 speed, 4 speed and reverse switchesHunter is listed among the compatible brands on each product page.

How to pick the right fan speed switch

Hunter fans use several switch layouts, so count before you buy.

Wire count alone does not always tell you the speed count, so check the terminal layout and speeds on your old switch as well. Our 3 speed switches category has the full range.

How to match your replacement part

  1. Turn the power off at the breaker and make sure the fan and light are dead before you open the housing.
  2. Photograph the wiring before you disconnect anything.
  3. Count the wires on the old switch and note the terminal letters or numbers.
  4. Compare the specs on the product page: wire count, terminal layout, switch type and size.
  5. Check your fan’s model number (usually on a label on the motor housing) against the Hunter models listed above.

Fit depends on the wire count, terminal layout and mounting size of your old part, not the brand name on the fan.

Hunter fan capacitors

Do you sell Hunter ceiling fan capacitors? Yes. Browse our ceiling fan capacitors in 2-wire, 3-wire, 4-wire and 5-wire CBB61 styles. Each product page lists Hunter among the compatible brands. A failing capacitor is a common reason a fan hums, starts slowly or won’t start while the light still works.

To choose the right one, match three things to your old capacitor: the number of wires, the uF values printed on the label, and a voltage rating that is equal or higher. Wire colors can differ. Not sure how to connect it? Read our ceiling fan capacitor wiring diagram and replacement guide.

Hunter fan parts FAQ

Which switch do I need for my Hunter 3 speed ceiling fan?

Count the wires on your old switch. A 4-wire switch is normally a 3 speed switch such as the KTE 3089R, KTE 3089B or Zing Ear ZE-208S. A switch with 5 to 8 wires may need the dual-wafer ZE-208D. Compare the terminal layout on the product page before ordering.

How do I replace a Hunter ceiling fan pull chain switch?

Switch off the breaker, remove the old switch, and note where each wire connects. Fit a replacement with the same wire count and terminals, connect the wires the same way, then restore power and test every speed.

What is the replacement for a Hunter ceiling fan light socket?

The Zing Ear ZE-301D is commonly used in many Hunter light kits. Our product page lists 20 Hunter model numbers, including 51014, 52034 and 53090.

Can I replace my Hunter fan’s reverse switch?

Yes. If the fan no longer changes direction, replace the reverse switch with a slide-style Zing Ear ZE-209-22 or a pull chain ZE-208S, matching your old switch’s style.

Will these parts fit every Hunter ceiling fan?

No single part fits every model. Each product page lists the Hunter models and part numbers it is used with. Check your fan’s model number against the page before you order.

Are these parts new?

Yes. The listings say brand new, and the specs on each page list the UR (UL) approval where it applies.

Do you sell Hunter ceiling fan capacitors?

Yes. Our ceiling fan capacitors are CBB61 capacitors in 2-wire, 3-wire, 4-wire and 5-wire styles, and Hunter is listed among the compatible brands on each product page. Match the wire count, the uF values and the voltage of your old capacitor before you order.

Can I return a part that doesn’t fit?

What Our Clients Say
54 reviews