โฐ MonโFri
10:00 AM โ 5:00 PM (EST)
โ๏ธ support@switchprince.com
๐ Ships from the United States
In-Line Lamp Dimmer Switch for Floor & Table Lamps
Replacement lamp dimmer switches for floor lamps and table lamps. These are rotary (turn-knob) dimmers wired into the lamp itself, so there is no wall wiring. Pole dimmers (the ZE-02 family) are sized to fit inside a floor lamp or torchiere pole. In-line dimmers (the ZE-03 family and ZE-256) have short wire leads and are used in table lamps.
Model
Style
Rating
Fit and notes
ZE-02
Pole dimmer for floor lamps
120VAC, 500W
Fits a pole 1-3/8 in. inside diameter or larger
ZE-02S
Pole dimmer for floor lamps
120VAC, 500W
Fits a pole 1-1/8 in. or wider; incandescent and halogen bulbs
ZE-02A
Pole dimmer for floor lamps
500W
Fits a pole 1-1/4 in. or wider
ZE-02SE
Torchiere pole dimmer with photocell
120VAC, 500W
Fits a pole 1-1/8 in. wide
ZE-03
In-line table lamp dimmer
120VAC, 300W
Two-wire, short wire leads
ZE-03A
In-line dimmer
120VAC, 300W
Choice of 1/2 in. or 1-1/4 in. shank
ZE-03-1
In-line 3-wire dimmer
120VAC, 300W
Three leads; also works as a motor speed controller
ZE-03SE
In-line table lamp dimmer with photocell
120VAC, 300W
Incandescent and halogen bulbs
ZE-256
In-line HI-LO-OFF dimmer
120VAC, 500W
Three settings instead of full-range dimming
Before you order โข Add up the wattage of the bulbs in the lamp and stay under the dimmer rating (300W or 500W, depending on the model). โข Check the bulb type. Several models list incandescent and halogen bulbs only, so confirm LED compatibility on the product page before using LED bulbs. โข For a pole dimmer, measure the inside diameter of the lamp pole and compare it with the size listed for the model. โข Count the wires on your old dimmer. Most models here are two-wire; the ZE-03-1 has three leads. โข Unplug the lamp before replacing a dimmer, and call an electrician if you are unsure.