The Zing Ear TP-01 replacement touch lamp module is an easy and affordable way to repair a non-working touch lamp or convert a standard metal-base lamp into a touch-activated lamp. Instead of replacing the entire lamp, simply replace the faulty control module to restore convenient touch operation.
Designed for 3-way dimming, the TP-01 allows you to cycle through Low, Medium, and High brightness levels with a simple touch, making it easy to adjust lighting for reading, relaxing, or everyday use. It is commonly used in table lamps, bedside lamps, and decorative lighting, providing a practical DIY solution for restoring or upgrading touch-controlled lighting.
- 3 Way touch dimmer module: Easily cycle through Low, Medium, and High brightness levels with a simple touch
- Restore or Upgrade Touch Lamps: Ideal for replacing a faulty touch control module or converting a compatible metal-base lamp into a touch-activated lamp
- Common Applications: Frequently used in table lamps, bedside lamps, floor lamps, and decorative lighting fixtures
- Solves Common Problems: Helps fix touch lamps that no longer respond, stay on one brightness level, turn on by themselves, or stop working completely
- Cost-Effective Repair: Restore convenient touch control without replacing the entire lamp
Zing Ear TP-01 Specifications
- Condition: Brand new
- Model: TP-01 ZH / TP-01F
- Alternate part numbers: TP01, TP 01, TP-01F, TP01F, TP 01F
- Electrical rating: 120VAC 150W, 60Hz
- Function: Low, Medium, High, OFF
- Wires length: 4in
- Compatible with dimmable light bulbs only
- Certifications: UR (UL) approved
- FCC rated: FCC part 15, Subpart B, Class B
- Usage: indoor only
- Material: Plastic housing
Compatible Replacements
Zing Ear TP-01 lamp touch switch module is commonly used as a replacement for the following models:
- TD104
- OK-IC4A
- TA-306A
- 6503BC
- MT-1009A
- MT-1001
- TC-306S
Wiring Instructions
Need help installing? View our step-by-step guide:
- TP 01 ZH touch light module wiring diagram & instructions
Zing Ear TP-01 FAQs
-
What does the Zing Ear TP-01 touch lamp control module do?
The TP-01 replaces the control module inside a touch lamp, allowing you to turn the lamp on and off and cycle through three brightness levels—Low, Medium, and High—by simply touching the lamp’s metal surface.
-
How do I know if the Zing Ear TP-01 will work with my lamp?
The Zing Ear TP-01 is designed for lamps with a conductive metal body or base that can detect touch input. Before purchasing, compare the wiring and specifications of your existing module and verify that your lamp is designed for touch control.
-
Why do touch lamps stop working?
Touch lamps can stop working for several reasons, but a failed touch control module is one of the most common causes. Symptoms may include the lamp not responding to touch, remaining stuck on one brightness level, turning on or off by itself, or not turning on at all. Replacing the touch control module can often restore normal operation without replacing the entire lamp.
-
Can I turn a normal lamp into a touch lamp?
Yes. The TP-01 can be used to convert many metal-base lamps into touch-activated lamps. The lamp must have a conductive metal body that can transfer the touch signal to the control module.
-
What problems can replacing the TP-01 fix?
Replacing a faulty touch control module can help resolve issues such as a lamp that no longer responds to touch, stays on one brightness level, turns on or off unexpectedly, or stops working completely.
-
Do I need a special 3-way light bulb?
No. The Zing Ear TP 01 ZH provides the brightness control electronically through the module itself and does not require a traditional 3-way bulb to cycle through Low, Medium, and High settings.
-
Can I install the TP-01 myself?
Yes. Replacing a touch lamp control module is a common DIY repair. Before starting, unplug the lamp and take a photo of the existing wiring so the new module can be connected the same way as the original.
Reviews
There are no reviews yet